A refrigerator water line should not be capped, yet it is a good idea. Only turn off the water pipes if you aren’t utilizing them right now. Even when not in use, a pipe can leak and rust.
How to connect a water line to your refrigerator? Instructions
- Turn off the Water. Locate the fixture shutoff valve on the cold water supply line under the kitchen sink.
- Disconnect the Faucet Water Line. Place a rag or small bucket under the supply valve to catch water draining from the supply tube.
- Connect the Tee Adapter.
- Connect the Supply Tube to the Refrigerator.
- Turn on the Water.
How to hook up water line to refridgerator?
- Your kitchen may already be plumbed for refrigerators with ice and water dispensers.
- If there isn’t an independent water supply line, you’ll have to use one that feeds the sink or dishwasher.
- If needed, plan for the water line to run through cabinets, above storage and behind drawers to prevent damage to the line.
Does a refrigerator need a water line? Refrigerators need water lines so that they can get the water needed to make ice and dispense water. That being said, if your refrigerator doesn’t have an ice maker or water dispenser, or if it has one or both of these but you prefer not to use them, you don’t need to connect the refrigerator to a water line.
Do refrigerators need to be attached to water line? Refrigerators that feature built-in water dispensers or automatic ice makers need to be connected to a water source. Water can be provided in one of two ways: by connecting the fridge directly to plumbing via a water line or by manually adding water to a reservoir inside the fridge.
unused refrigerator water line
How to hook up water line to refridgerator?
- Your kitchen may already be plumbed for refrigerators with ice and water dispensers.
- If there isn’t an independent water supply line, you’ll have to use one that feeds the sink or dishwasher.
- If needed, plan for the water line to run through cabinets, above storage and behind drawers to prevent damage to the line.
How do you connect a refrigerator to a water line?
- Unplug the refrigerator or disconnect power.
- Attach the copper tube to the valve inlet using a compression nut and sleeve as shown.
- Turn water supply valve ON.
- Plug in the refrigerator or reconnect power.
Does a refrigerator need a water line? Refrigerators need water lines so that they can get the water needed to make ice and dispense water. That being said, if your refrigerator doesn’t have an ice maker or water dispenser, or if it has one or both of these but you prefer not to use them, you don’t need to connect the refrigerator to a water line.
How to connect a water line to your refrigerator? Instructions
- Turn off the Water. Locate the fixture shutoff valve on the cold water supply line under the kitchen sink.
- Disconnect the Faucet Water Line. Place a rag or small bucket under the supply valve to catch water draining from the supply tube.
- Connect the Tee Adapter.
- Connect the Supply Tube to the Refrigerator.
- Turn on the Water.
How to connect a water line to your refrigerator?
How to hook up a water line to your refrigerator? You’ll need to make sure you have on hand:
- Enough copper piping to reach from the refrigerator to the closest and most convenient cold water source
- A T-fitting, which you can install in the cold water line to make a split that will feed to the refrigerator
- The connection piece that will link the copper tubing to the inlet to the refrigerator
How do I hook up a refrigerator water line? How to Connect a Water Line to Your Refrigerator
How do you attach water line to refrigerator? Attach one end of the copper tubing to the refrigerator‘s water pipe, using a nut and ferrule. Important: Make sure you leave extra tubing coiled behind the refrigerator, so you can move the refrigerator when necessary. Cut the cold water line under the sink or in the basement and attach a copper T-fitting. Attach a water valve to the T-fitting.
Do refrigerators need to be attached to water line? Refrigerators that feature built-in water dispensers or automatic ice makers need to be connected to a water source. Water can be provided in one of two ways: by connecting the fridge directly to plumbing via a water line or by manually adding water to a reservoir inside the fridge.